Extra Clear EVA Film For Ultra-White Glass (VE-TP) Extra Clear EVA Film For Ultra-White Glass (VE-TP)

VE-TP is an ultra-high transparent EVA film developed by E&N for ultra-clear glass lamination. Its laminated glass has the characteristics of ultra-high permeability and impact resistance.The scope of application is ultra-clear glass laminated and wired glass. Jewelry cabinets, display case laminated glass and other laminated wire glass with strict requirements on transparency.

  • 0.25mm*2000/2400mm*150m
  • 0.38mm*2000/2400mm*100m
  • 0.50mm*2000/2400mm*80m
  • 0.76mm*2000/2400mm*50m
  • Thickness and width can be customized
Share this:

Product Description

Main Characteristic:

1.Ultra-high transparency,ultra-high whiteness,effectively improve the visual transparency of ultra-white laminated glass

2.Ultra-low haze,can also show the transparency of ultra-white glass under strong light concentrated irradiation

3.Weather resistance,adhesion and impact resistance all meet the requirements of outdoor building grades



1.Ultra-clear glass lamination

2.Jewelry cabinet, display cabinet laminated glass

3.Other laminated glass with strict requirements on transparency



Product Performance Parameter List:

Test item

Test method






E&N Laboratory


UV blocked rate



Tensile strength



Adhesion with glass



Elongation at break



Cross-linking rate

E&N Laboratory


Water absorption



High temperature test 4hrs 100℃

EN 14449/EN1SO12543

No visible change

Humidity resistance  85℃ 85%RH 1000hrs


Haze appeared just 2.5cm from the edge without bubbles or delamination

UV radiation test UVA340 60℃ 65%RH 2000hrs


Yellowing index:Δ<1

Pendulum test(hight:1200mm)

EN14449/EN 12600


Ball impact peeling resistance(hight:4m)




Note:the information and relevant data listed in this article are established in the laboratory of the company's technical department,and their contents are correct based on the turth.However,we will not make any statement or guarantee on the integrity or accuracy of the listed information and data.We provide the content of this article on the condition that it is for the user's reference only,and before using it,decide whether the information and data are suitable for their own purpose of use.In no event shall we be liable or liable for damages of any nature whatsoever arising out of the use of or reliance on the content of this document or the products mentioned herein.


Packing Specification:

1.Without plywood case: tinfoil vacuum + bubble wrap + composite kraft paper

2.With plywood case: tinfoil vacuum + carton box + plywood case


Shelf Life of Product:

1 year

Processing Guidance

Preparation Before Laminating:

1. Clean and fully dry the glass, there should be no particle dust or oil on the glass surface, EVA film and other intermediate materials are spare.

2. After opening the furnace, cool down for 3~5 minutes, until the vacuum value reaches -0.095MPa, close the furnace door and officially heat.  


Parameter setting:

First Step

Second Step

Full Vacuum Retention

Temperature Out of Furnace





The above-mentioned temperature refers to the glass surface temperature.This lamination parameter is suitable for laminated glass with 5mm+0.38EVA+5mm structure.The specific conditions should be adjusted according to the difference of lamination equipment,temperature and humidity,glass thickness,and middle layer material.

FAQ About the Product

1.Can it be used outdoors?



2.What is the difference between degree of crosslinking and UV blocking rate?

The degree of cross-linking affects whether the product can be applied outdoors. In general, products with a degree of cross-linking >85% can be applied outdoors. The UV blocking ratio only determines the blocking ratio of the product to UV rays, and has nothing to do with whether the product can be applied outdoors.


3.Why does VE-TP have a longer lead time?

Because the order of VE-TP is relatively small, and our production will be arranged according to the order.


4.Why is the actual thickness measured by the product a little thicker?

Because the product has embossing, some places have deep embossing, and some places have shallow embossing, the measured thickness will be different.


5.Does VE-TP have fragment retention capabilities?

Yes, this is the basic performance of all our products.


Contact Us



Company Name